Filter :
Standard and/or project under the direct responsibility of ISO/TC 92/SC 1 Secretariat | Stage | ICS |
---|---|---|
Fire tests — Building materials — Non-combustibility test
|
95.99 | |
Fire tests — Building materials — Non-combustibility test
|
95.99 | |
Reaction to fire tests for building products — Non-combustibility test
|
95.99 | |
Reaction to fire tests for products — Non-combustibility test
|
95.99 | |
Reaction to fire tests for products — Non-combustibility test
|
60.60 | |
Reaction to fire tests for building products — Determination of the heat of combustion
|
95.99 | |
Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
|
95.99 | |
Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
|
90.93 | |
Light measuring system for smoke emission testing
|
60.60 | |
Standard tests for measuring reaction-to-fire of products and materials — Their development and application
|
90.60 | |
Tests for measuring "reaction-to-fire" of building materials — Their development and application
|
95.99 | |
Reaction to fire tests — Parallel panel test method for wall systems — Measurement of heat release and smoke production
|
40.60 | |
Fire tests — Reaction to fire — Ignitability of building products
|
95.99 | |
Fire tests — Reaction to fire — Ignitability of building products
|
95.99 | |
Reaction to fire tests — Ignitability of building products using a radiant heat source
|
90.93 | |
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
|
95.99 | |
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
|
90.93 | |
Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building products in vertical configuration
|
95.99 | |
Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration
|
90.93 | |
Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration — Amendment 1
|
60.60 | |
Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
|
90.93 | |
Fire tests — Reaction to fire — Part 1: Rate of heat release from building products — (Cone calorimeter method)
|
95.99 | |
Fire tests — Reaction to fire — Part 1: Rate of heat release from building products — (Cone calorimeter method) — Technical Corrigendum 1
|
95.99 | |
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method)
|
95.99 | |
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
|
90.93 | |
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) — Amendment 1
|
60.60 | |
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 2: Smoke production rate (dynamic measurement)
|
95.99 | |
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
|
95.99 | |
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
|
90.93 | |
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of heat release for determination of low levels of combustibility
|
95.99 | |
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release
|
90.93 | |
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
|
30.60 |
|
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
|
90.92 | |
Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes
|
60.60 | |
Fire tests — Reaction to fire — Smoke generated by building products (dual-chamber test)
|
95.99 | |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source
|
95.99 | |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 1
|
95.99 | |
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 2
|
95.99 | |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
|
95.99 | |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
|
90.92 | |
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
|
40.60 | |
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
|
95.60 | |
Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration
|
90.93 | |
Reaction-to-fire tests — Full-scale room tests for surface products — Part 2: Technical background and guidance
|
90.93 | |
Fire tests — Full-scale room test for surface products
|
95.99 | |
Fire tests — Full-scale room test for surface products — Technical Corrigendum 1
|
95.99 | |
Uses of reaction to fire test results — Part 1: Application of test results to predict fire performance of internal linings and other building products
|
90.93 | |
Uses of reaction to fire test results — Part 2: Fire hazard assessment of construction products
|
90.93 | |
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 1: Guidance on ignitability
|
90.93 | |
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single flame source test
|
95.99 | |
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single flame source test — Technical Corrigendum 1
|
95.99 | |
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test
|
95.99 | |
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test
|
95.99 | |
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test — Technical Corrigendum 1
|
95.99 | |
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test
|
90.92 | |
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test
|
40.20 | |
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test
|
90.93 | |
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test — Technical Corrigendum 1
|
60.60 | |
Reaction to fire tests — Measurement of material properties using a fire propagation apparatus
|
90.93 | |
Standard test method for assessing the ignition propensity of cigarettes
|
95.99 | |
Standard test method for assessing the ignition propensity of cigarettes — Amendment 1
|
95.99 | |
Standard test method for assessing the ignition propensity of cigarettes — Technical Corrigendum 1
|
95.99 | |
Standard test method for assessing the ignition propensity of cigarettes
|
60.60 | |
Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
|
90.93 | |
Reaction-to-fire tests for sandwich panel building systems — Part 1: Test method for small rooms
|
95.99 | |
Reaction to fire test for sandwich panel building systems — Part 1: Small room test
|
90.92 | |
Reaction to fire test for sandwich panel building systems — Part 1: Small room test
|
20.00 |
|
Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms
|
95.99 | |
Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms
|
60.60 | |
Reaction-to-fire tests for façades — Part 1: Intermediate-scale test
|
90.92 | |
Reaction-to-fire tests for façades — Part 1: Intermediate-scale test
|
20.20 |
|
Reaction-to-fire tests for façades — Part 2: Large-scale test
|
90.60 | |
Reaction-to-fire tests — Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
|
90.93 | |
Reaction to fire tests — Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
|
95.99 | |
Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
|
95.60 | |
Fire tests — Guidance on the choice of substrates for building products
|
95.99 | |
Fire tests — Calibration and use of heat flux meters — Part 1: General principles
|
90.93 | |
Fire tests — Calibration and use of radiometers and heat flux meters — Part 1: General principles
|
95.99 | |
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
|
95.99 | |
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
|
90.93 | |
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
|
95.99 | |
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
|
90.93 | |
Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests
|
90.93 | |
Fire tests — Calibration of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests
|
95.99 | |
Room corner and open calorimeter — Guidance on sampling and measurement of effluent gas production using FTIR technique
|
90.93 | |
Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering
|
95.99 | |
Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering
|
60.60 | |
Fire tests— Reduced-scale model box test
|
90.60 | |
Reaction to fire tests — Mass loss measurement
|
95.99 | |
Reaction to fire tests — Mass loss measurement
|
90.93 | |
Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
|
90.93 | |
Fire tests — Use of LED (light-emitting diode) as an alternative to white light for measuring smoke parameters
|
60.60 | |
Reaction-to-fire tests — Small room test for pipe insulation products or systems
|
95.99 | |
FTIR analysis of fire effluents in cone calorimeter tests
|
90.60 | |
Example for using reaction-to-fire test data for FSE
|
30.99 | |
Reaction to fire tests — Fire growth — Full-scale test for stairs and stair coverings
|
90.93 | |
Reaction to fire test for sandwich panel building systems — Intermediate-scale box test
|
60.60 | |
Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
|
90.93 | |
Fire tests — Uncertainty of measurements in fire tests
|
90.93 |
No matching records found. Please try changing the filter settings.