Filtrar :
Norma o proyecto bajo la responsabilidad directa de ISO/TC 92/SC 1 Secretaría Etapa ICS
Fire tests — Building materials — Non-combustibility test
95.99
Fire tests — Building materials — Non-combustibility test
95.99
Reaction to fire tests for building products — Non-combustibility test
95.99
Reaction to fire tests for products — Non-combustibility test
95.99
Reaction to fire tests for products — Non-combustibility test
60.60
Reaction to fire tests for building products — Determination of the heat of combustion
95.99
Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
95.99
Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
90.93
Light measuring system for smoke emission testing
60.60
Standard tests for measuring reaction-to-fire of products and materials — Their development and application
90.60
Tests for measuring "reaction-to-fire" of building materials — Their development and application
95.99
Reaction to fire tests — Parallel panel test method for wall systems — Measurement of heat release and smoke production
40.60
Fire tests — Reaction to fire — Ignitability of building products
95.99
Fire tests — Reaction to fire — Ignitability of building products
95.99
Reaction to fire tests — Ignitability of building products using a radiant heat source
90.93
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
95.99
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
90.93
Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building products in vertical configuration
95.99
Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration
90.93
Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration — Amendment 1
60.60
Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
90.93
Fire tests — Reaction to fire — Part 1: Rate of heat release from building products — (Cone calorimeter method)
95.99
Fire tests — Reaction to fire — Part 1: Rate of heat release from building products — (Cone calorimeter method) — Technical Corrigendum 1
95.99
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method)
95.99
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
90.93
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) — Amendment 1
60.60
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 2: Smoke production rate (dynamic measurement)
95.99
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
95.99
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
90.93
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of heat release for determination of low levels of combustibility
95.99
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release
90.93
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
30.60
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 5: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
90.92
Evaluation of physical parameters of filter paper substrates for the determination of the ignition propensity of cigarettes
60.60
Fire tests — Reaction to fire — Smoke generated by building products (dual-chamber test)
95.99
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source
95.99
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 1
95.99
Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source — Technical Corrigendum 2
95.99
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
95.99
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
90.92
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
40.60
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
95.60
Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration
90.93
Reaction-to-fire tests — Full-scale room tests for surface products — Part 2: Technical background and guidance
90.93
Fire tests — Full-scale room test for surface products
95.99
Fire tests — Full-scale room test for surface products — Technical Corrigendum 1
95.99
Uses of reaction to fire test results — Part 1: Application of test results to predict fire performance of internal linings and other building products
90.93
Uses of reaction to fire test results — Part 2: Fire hazard assessment of construction products
90.93
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 1: Guidance on ignitability
90.93
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single flame source test
95.99
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single flame source test — Technical Corrigendum 1
95.99
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test
95.99
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test
95.99
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test — Technical Corrigendum 1
95.99
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test
90.92
Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test
40.20
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test
90.93
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test — Technical Corrigendum 1
60.60
Reaction to fire tests — Measurement of material properties using a fire propagation apparatus
90.93
Standard test method for assessing the ignition propensity of cigarettes
95.99
Standard test method for assessing the ignition propensity of cigarettes — Amendment 1
95.99
Standard test method for assessing the ignition propensity of cigarettes — Technical Corrigendum 1
95.99
Standard test method for assessing the ignition propensity of cigarettes
60.60
Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
90.93
Reaction-to-fire tests for sandwich panel building systems — Part 1: Test method for small rooms
95.99
Reaction to fire test for sandwich panel building systems — Part 1: Small room test
90.92
Reaction to fire test for sandwich panel building systems — Part 1: Small room test
20.00
Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms
95.99
Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms
60.60
Reaction-to-fire tests for façades — Part 1: Intermediate-scale test
90.92
Reaction-to-fire tests for façades — Part 1: Intermediate-scale test
20.20
Reaction-to-fire tests for façades — Part 2: Large-scale test
90.60
Reaction-to-fire tests — Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
90.93
Reaction to fire tests — Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
95.99
Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
95.60
Fire tests — Guidance on the choice of substrates for building products
95.99
Fire tests — Calibration and use of heat flux meters — Part 1: General principles
90.93
Fire tests — Calibration and use of radiometers and heat flux meters — Part 1: General principles
95.99
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
95.99
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
90.93
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
95.99
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
90.93
Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests
90.20
Fire tests — Calibration of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests
95.99
Room corner and open calorimeter — Guidance on sampling and measurement of effluent gas production using FTIR technique
90.93
Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering
95.99
Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering
60.60
Fire tests— Reduced-scale model box test
90.60
Reaction to fire tests — Mass loss measurement
95.99
Reaction to fire tests — Mass loss measurement
90.93
Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
90.20
Fire tests — Use of LED (light-emitting diode) as an alternative to white light for measuring smoke parameters
60.60
Reaction-to-fire tests — Small room test for pipe insulation products or systems
95.99
FTIR analysis of fire effluents in cone calorimeter tests
90.60
Example for using reaction-to-fire test data for FSE
30.99
Reaction to fire tests — Fire growth — Full-scale test for stairs and stair coverings
90.20
Reaction to fire test for sandwich panel building systems — Intermediate-scale box test
60.60
Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
90.93
Fire tests — Uncertainty of measurements in fire tests
90.93

No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.