Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Round punches with 60 degrees conical head and straight shank
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Round punches with 60 degrees conical head and straight shank
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools, jigs and fixtures
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools
|
90.93 | ISO/TC 29/SC 8 |
Machined plates for press tools, moulds, jigs and fixtures — Nominal dimensions
|
95.99 | ISO/TC 29/SC 8 |
Open front mechanical power presses — Capacity ratings and dimensions
|
90.93 | ISO/TC 39 |
Acceptance conditions of open front mechanical power presses — Testing of the accuracy
|
90.93 | ISO/TC 39 |
Punches with cylindrical head and reduced shank
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Punches with cylindrical head and reduced shank
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Punches with cylindrical head and straight or reduced shank
|
90.60 | ISO/TC 29/SC 8 |
Round punches with cylindrical head and straight shank
|
95.99 | ISO/TC 29/SC 8 |
Open front mechanical power presses — Vocabulary
|
90.93 | ISO/TC 39 |
Tools for pressing — Punches — Nomenclature and terminology
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Punches — Nomenclature and terminology
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Round matrixes
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Matrixes
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guides for round punches
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Round punches with 60 degrees conical head and reduced shank
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Round punches with 60 degrees conical head and reduced shank
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 1: Types
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 1: Types
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 1: Types
|
60.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
|
60.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars
|
60.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
|
60.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange
|
60.60 | ISO/TC 29/SC 8 |
Tools for pressing — Wear plates for press dies — Part 1: Type A
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Wear plates for press dies — Part 1: Type A
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Wear plates for press dies — Part 2: Type B
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Wear plates for press dies — Part 2: Type B
|
90.93 | ISO/TC 29/SC 8 |
Machine tools — Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force — Characteristics and dimensions
|
90.93 | ISO/TC 39 |
Machine tools — Straight-sided high-speed mechanical power presses from 250 kN up to and including 4 000 kN nominal force — Characteristics and dimensions
|
90.93 | ISO/TC 39 |
Tools for pressing — Guide bushes — Part 1: Forms
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 1: Forms
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Elastomer pressure springs — Part 1: General specification
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Elastomer pressure springs — Part 1: General specification
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Elastomer pressure springs — Part 2: Specification of accessories
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Ball-lock punches — Part 1: Ball-lock punches for light duty
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Ball-lock punches — Part 2: Ball-lock punches for heavy duty
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Ball-lock punches
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Punch holder shanks — Part 1: Types A and B
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Punch holder shanks — Part 1: Type A
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Punch holder shanks — Part 1: Type A
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Punch holder shanks — Part 2: Type C
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Punch holder shanks — Part 2: Type C
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Punch holder shanks — Part 3: Type D
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Punch holder shanks — Part 3: Type D
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding — Amendment 1
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Die sets
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Ball-lock punch retainers — Part 3: Type E, reduced for heavy duty
|
90.60 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 1: General specifications
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 1: General specifications
|
90.92 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 1: General specifications
|
40.99 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 2: Specification of accessories
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 2: Specification of accessories
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 2: Specification of accessories
|
90.92 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 2: Specification of accessories
|
40.60 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height
|
60.60 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height
|
60.60 | ISO/TC 29/SC 8 |
Tools for pressing — Gas springs — Part 5: Safety instructions for gas springs
|
60.60 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillar mountings
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide pillar mountings
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — L-shaped guides
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — L-shaped guides
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Guide plates — U- and V-blocks
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Guide plates — U- and V-blocks
|
90.92 | ISO/TC 29/SC 8 |
Tools for pressing — Guide plates — U- and V-blocks
|
30.60 | ISO/TC 29/SC 8 |
Press tools for tablets — Punches and dies
|
95.99 | ISO/TC 29/SC 8 |
Press tools for tablets — Punches and dies
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Spring plungers with helicoidal compression steel spring or gas spring
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Heel guidings in large stamping and forming dies
|
90.92 | ISO/TC 29/SC 8 |
Tools for pressing — Heel guidings in large stamping and forming dies
|
40.20 | ISO/TC 29/SC 8 |
Tools for pressing — Vocabulary
|
60.60 | ISO/TC 29/SC 8 |
Tools for pressing — Sliding plates
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Sliding plates
|
90.93 | ISO/TC 29/SC 8 |
Tools for pressing — Cam driver plates
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Cam driver plates
|
95.99 | ISO/TC 29/SC 8 |
Tools for pressing — Cam driver plates
|
60.60 | ISO/TC 29/SC 8 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.