Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Brinell hardness test for steel
|
95.99 | ISO/TC 164/SC 3 |
Rockwell hardness test (B and C scales) for steel
|
95.99 | ISO/TC 164/SC 3 |
Vickers hardness test for steel (Load 5 to 100 kgf)
|
95.99 | ISO/TC 164/SC 3 |
Steel — Tensile testing
|
95.99 | ISO/TC 164/SC 1 |
Steel — Charpy impact test (U-notch)
|
95.99 | ISO/TC 164/SC 4 |
Izod impact test for steel
|
95.99 | ISO/TC 164/SC 4 |
Bend test for steel
|
95.99 | ISO/TC 164/SC 2 |
Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
|
95.99 | ISO/TC 164/SC 1 |
Simple bend testing of steel sheet and strip less than 3 mm thick
|
95.99 | ISO/TC 164/SC 2 |
Reverse bend testing of steel sheet and strip less than 3 mm thick
|
95.99 | ISO/TC 164/SC 2 |
Steel — Tensile testing of wire
|
95.99 | ISO/TC 164/SC 1 |
Steel — Simple torsion testing of wire
|
95.99 | ISO/TC 164/SC 2 |
Steel — Reverse bend testing of wire
|
95.99 | ISO/TC 164/SC 2 |
Wrapping test for steel wire
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100
|
95.99 | ISO/TC 164/SC 3 |
Verification of Vickers hardness testing machines
|
95.99 | ISO/TC 164 |
Load calibration of testing machines for tensile testing of steel
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Charpy pendulum impact test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Charpy pendulum impact test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Charpy pendulum impact test — Part 1: Test method
|
90.92 | ISO/TC 164/SC 4 |
Metallic materials — Charpy pendulum impact test — Part 2: Verification of test machines
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
|
90.92 | ISO/TC 164/SC 4 |
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
|
90.92 | ISO/TC 164/SC 4 |
Steel — Charpy impact test (V-notch)
|
95.99 | ISO/TC 164/SC 4 |
Modified Erichsen cupping test for steel sheet and strip
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Hardness test — Verification of Brinell hardness testing machines
|
95.99 | ISO/TC 164/SC 3 |
Flanging test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Drift expanding test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Bend test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Brinell hardness test for grey cast iron
|
95.99 | ISO/TC 25 |
Tensile testing of light metals and their alloys
|
95.99 | ISO/TC 164/SC 1 |
Brinell hardness test for light metals and their alloys
|
95.99 | ISO/TC 164/SC 3 |
Wickers hardness test for light metals and their alloys
|
95.99 | ISO/TC 164/SC 3 |
Drift expanding test on copper and copper alloy tubes
|
95.99 | ISO/TC 164/SC 2 |
Flattening test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Uninterrupted uniaxial creep testing in tension — Method of test
|
95.99 | ISO/TC 164/SC 1 |
Non-interrupted creep testing of steel at elevated temperatures
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Uniaxial creep testing in tension — Method of test
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Uniaxial creep testing in tension — Method of test
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Uniaxial creep testing in tension — Method of test
|
60.60 | ISO/TC 164/SC 1 |
Determination of proof stress and proving test for steel at elevated temperature
|
95.99 | ISO/TC 17/SC 20 |
Creep stress rupture testing of steel at elevated temperatures
|
95.99 | ISO/TC 164/SC 1 |
General principles for fatigue testing of metals
|
95.99 | ISO/TC 164 |
Ring expanding test on steel tubes
|
95.99 | ISO/TC 164/SC 2 |
Steel — Tensile testing of tubes
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
95.99 | ISO/TC 164/SC 1 |
Calibration of elastic proving devices
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
90.93 | ISO/TC 164/SC 1 |
Selection and preparation of samples and test pieces of wrought steels — Part 1: Samples and test pieces for mechanical test
|
95.99 | ISO/TC 17/SC 20 |
Wrought steel — Selection and preparation of samples and test pieces
|
95.99 | ISO/TC 17/SC 20 |
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
|
95.99 | ISO/TC 17/SC 20 |
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing — Technical Corrigendum 1
|
95.99 | ISO/TC 17/SC 20 |
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
|
95.99 | ISO/TC 17/SC 20 |
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
|
90.93 | ISO/TC 17/SC 20 |
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing — Amendment 1
|
40.00 | ISO/TC 17/SC 20 |
Wrapping test for copper and copper alloy wire
|
95.99 | ISO/TC 164/SC 2 |
Bend test for copper and copper alloys
|
95.99 | ISO/TC 164/SC 2 |
Vickers hardness test for copper and copper alloys (Test loads from 2.5 to 50 kgf)
|
95.99 | ISO/TC 164/SC 3 |
Tensile testing of copper and copper alloys
|
95.99 | ISO/TC 164/SC 1 |
Tensile testing of copper and copper alloy tubes of circular section
|
95.99 | ISO/TC 164/SC 1 |
Tensile testing of copper and copper alloy wire
|
95.99 | ISO/TC 164/SC 1 |
Brinell hardness test for copper and copper alloys
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5
|
95.99 | ISO/TC 164/SC 3 |
Tables of Vickers hardness values (HV) for metallic materials
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces
|
95.99 | ISO/TC 164/SC 3 |
Verification of pendulum impact testing machines for testing steels
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100
|
95.99 | ISO/TC 164/SC 3 |
Calibration of standardized blocks to be used for Vickers hardness testing machines
|
95.99 | ISO/TC 164 |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
|
95.99 | ISO/TC 164/SC 3 |
Calibration of standardized blocks to be used for Rockwell B and C scale hardness testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
|
95.99 | ISO/TC 164/SC 3 |
Verification of Rockwell B and C scale hardness testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Tensile testing at elevated temperature
|
95.99 | ISO/TC 164/SC 1 |
Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing at elevated temperature
|
95.99 | ISO/TC 164/SC 1 |
Grey cast iron — Beam unnotched impact test
|
95.99 | ISO/TC 25 |
Tensile testing of light metal and light metal alloy tubes
|
95.99 | ISO/TC 164/SC 1 |
Drift expanding test on light metal and light metal alloy tubes
|
95.99 | ISO/TC 164/SC 2 |
Simple bend test for light metal and light metal alloy sheet and strip of thickness between 0,2 mm (0.008 in) and 7 mm (0.25 in)
|
95.99 | ISO/TC 164/SC 2 |
Flattening test on aluminium and aluminium alloy tubes
|
95.99 | ISO/TC 164/SC 2 |
Tensile test for light metal and light metal alloy wires
|
95.99 | ISO/TC 164/SC 1 |
Simple torsion test for aluminium and aluminium alloy wire
|
95.99 | ISO/TC 164/SC 2 |
Wrapping test for aluminium and aluminium alloy wire
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)
|
95.99 | ISO/TC 164/SC 3 |
Rockwell superficial hardness test (N and T scales) for steel
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
|
95.99 | ISO/TC 164/SC 3 |
Verification of Rockwell superficial N and T scale hardness testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metals — Axial load fatigue testing
|
95.99 | ISO/TC 164 |
Metallic materials — Fatigue testing — Axial force-controlled method
|
95.99 | ISO/TC 164 |
Metallic materials — Fatigue testing — Axial force-controlled method
|
90.92 | ISO/TC 164/SC 4 |
Metals — Rotating bar bending fatigue testing
|
95.99 | ISO/TC 164 |
Metallic materials — Rotating bar bending fatigue testing
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Rotating bar bending fatigue testing
|
60.60 | ISO/TC 164/SC 4 |
Steel — Torsional stress fatigue testing
|
95.99 | ISO/TC 164 |
Metallic materials — Torque-controlled fatigue testing
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Torque-controlled fatigue testing
|
60.60 | ISO/TC 164/SC 4 |
Calibration of standardized blocks to be used for Rockwell superficial N and T scale hardness testing machines
|
95.99 | ISO/TC 164/SC 3 |
Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test
|
95.99 | ISO/TC 164/SC 1 |
Copper and copper alloy tubes of circular section — Flattening test
|
95.99 | ISO/TC 164/SC 2 |
Aluminium and aluminium alloys — Shear test for rivet wire and rivets
|
95.99 | ISO/TC 164/SC 2 |
Wrought aluminium, magnesium and their alloys — Selection of specimens and test pieces for mechanical testing
|
95.99 | ISO/TC 79/SC 6 |
Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels
|
95.99 | ISO/TC 17 |
Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels
|
95.99 | ISO/TC 17/SC 20 |
Steel — Conversion of elongation values — Part 1: Carbon and low-alloy steels
|
60.60 | ISO/TC 17/SC 20 |
Steel — Conversion of elongation values — Part 2: Austenitic steels
|
95.99 | ISO/TC 17/SC 20 |
Steel — Conversion of elongation values — Part 2: Austenitic steels
|
60.60 | ISO/TC 17/SC 20 |
Tensile testing systems — Determination of K-value
|
95.99 | ISO/TC 164/SC 1 |
Copper and copper alloys — Reverse bend testing of wire
|
95.99 | ISO/TC 164/SC 2 |
Copper and copper alloys — Simple torsion testing of wire
|
95.99 | ISO/TC 164/SC 2 |
Copper and copper alloys — Rockwell superficial hardness test (N and T scales)
|
95.99 | ISO/TC 164/SC 3 |
Copper and copper alloys — Rockwell hardness test (B, F and G scales)
|
95.99 | ISO/TC 164/SC 3 |
Sintered metal bushes — Determination of radial crushing strength
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal bushes — Determination of radial crushing strength
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal bushings — Determination of radial crushing strength
|
90.93 | ISO/TC 119/SC 3 |
Sintered metal materials (excluding hardmetal) — Tensile test pieces
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials (excluding hardmetal) — Tensile test pieces
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Tensile test pieces
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Tensile test pieces
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Tensile test pieces
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Tensile test pieces
|
60.60 | ISO/TC 119/SC 3 |
Sintered metal materials and hardmetals — Determination of Young's modulus
|
95.99 | ISO/TC 119 |
Sintered metal materials and hardmetals — Determination of Young modulus
|
90.93 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
|
90.92 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength — Amendment 1: Precision statement
|
60.60 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
|
40.99 | ISO/TC 119/SC 3 |
Hardmetals — Determination of transverse rupture strength
|
95.99 | ISO/TC 119/SC 4 |
Hardmetals — Determination of transverse rupture strength
|
90.20 | ISO/TC 119/SC 4 |
Hardmetals — Rockwell hardness test (scale A) — Part 1: Test method
|
90.93 | ISO/TC 119/SC 4 |
Hardmetals — Rockwell hardness test (scale A) — Part 2: Preparation and calibration of standard test blocks
|
90.93 | ISO/TC 119/SC 4 |
Hardmetals — Rockwell hardness test (Scale A)
|
95.99 | ISO/TC 119/SC 4 |
Steel — Designation of test piece axes
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Designation of test specimen axes in relation to product texture
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Designation of test specimen axes in relation to product texture
|
60.60 | ISO/TC 164/SC 4 |
Hardmetals — Vickers hardness test
|
95.99 | ISO/TC 119/SC 4 |
Sintered metal materials, excluding hardmetals — Fatigue test pieces
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Fatigue test pieces
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Fatigue test pieces
|
90.93 | ISO/TC 119/SC 3 |
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
|
95.99 | ISO/TC 119 |
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
|
95.99 | ISO/TC 119/SC 2 |
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts
|
60.60 | ISO/TC 119/SC 2 |
Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness
|
90.93 | ISO/TC 119/SC 3 |
Hardmetals — Compression test
|
95.99 | ISO/TC 119/SC 4 |
Hardmetals — Compression test
|
90.60 | ISO/TC 119/SC 4 |
Sintered ferrous materials, carburized or carbonitrided — Determination and verification of effective case depth by the Vickers microhardness testing method
|
95.99 | ISO/TC 119/SC 3 |
Sintered ferrous materials, carburized or carbonitrided — Determination and verification of case-hardening depth by a micro-hardness test
|
90.93 | ISO/TC 119/SC 3 |
Metallic materials — Knoop hardness test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Knoop hardness test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Knoop hardness test — Part 1: Test method
|
60.60 | ISO/TC 164/SC 3 |
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Knoop test
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Verification of Knoop hardness testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Knoop hardness testing machines
|
95.99 | ISO/TC 164/SC 3 |
Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing
|
90.20 | ISO/TC 26 |
Steel — Hardness conversions
|
95.99 | ISO/TC 17/SC 20 |
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems
|
90.93 | ISO/TC 164/SC 4 |
Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation
|
90.93 | ISO/TC 164/SC 4 |
Axial load fatigue testing machines — Dynamic force calibration — Strain gauge technique
|
95.99 | ISO/TC 164 |
Sintered metal materials, excluding hardmetals — Unnotched impact test piece
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Unnotched impact test piece
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials, excluding hardmetals — Unnotched impact test piece
|
60.60 | ISO/TC 119/SC 3 |
Metallic materials — Brinell hardness test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 1: Test method
|
90.92 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 1: Test method
|
40.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
90.92 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
|
40.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
|
90.92 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
|
40.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Brinell test
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Vickers test — Part 1: HV 5 to HV 100
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 1: Test method
|
60.60 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Vickers test — Part 2: HV 0,2 to less than HV 5
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 2: Verification of testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Vickers test — Part 3: Less than HV 0,2
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 1: Test method
|
60.60 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
|
60.60 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
|
60.60 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Rockwell test (scales A - B - C - D - E - F - G - H - K)
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
|
60.60 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
|
90.92 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing — Part 3: Method of test at low temperature
|
90.93 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
|
90.93 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing — Part 5: Specification for testing miniaturised test pieces
|
50.20 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing at ambient temperature
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing — Method for evaluating the susceptibility of materials to the effects of high-pressure gas within hollow test pieces
|
60.60 | ISO/TC 164/SC 1 |
Metallic materials — Bend test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Bend test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Bend test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Bend test
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tensile testing machines
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system — Technical Corrigendum 1
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
|
90.93 | ISO/TC 164/SC 1 |
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied load
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force
|
90.93 | ISO/TC 164/SC 1 |
Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test
|
90.92 | ISO/TC 164/SC 2 |
Metallic materials — Wire — Simple torsion test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Wire — Simple torsion test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Wire — Simple torsion test
|
90.93 | ISO/TC 164/SC 2 |
Metallic materials — Wire — Reverse bend test
|
90.92 | ISO/TC 164/SC 2 |
Metallic materials — Wire — Reverse bend test
|
50.20 | ISO/TC 164/SC 2 |
Metallic materials — Wire — Wrapping test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Wire — Wrapping test
|
90.93 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Modified Erichsen cupping test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube (in full section) — Bend test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube (in full section) — Bend test
|
90.93 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Flattening test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Flattening test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Flattening test
|
90.93 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Drift-expanding test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Drift-expanding test
|
90.93 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Flanging test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Flanging test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Flanging test
|
90.93 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Ring-expanding test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Ring-expanding test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Ring-expanding test
|
90.93 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Ring tensile test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Ring tensile test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube — Ring tensile test
|
90.93 | ISO/TC 164/SC 2 |
Metallic materials — Verification of extensometers used in uniaxial testing
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Calibration of extensometers used in uniaxial testing
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Calibration of extensometer systems used in uniaxial testing
|
90.93 | ISO/TC 164/SC 1 |
Metallic materials — Calibration of extensometer systems used in uniaxial testing — Technical Corrigendum 1
|
60.60 | ISO/TC 164/SC 1 |
Metallic materials — Wire — Reverse torsion test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Wire — Reverse torsion test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Wire — Reverse torsion test
|
60.60 | ISO/TC 164/SC 2 |
Steel — Conversion of hardness values to tensile strength values
|
95.99 | ISO/TC 17/SC 20 |
Metallic materials — Sheet and strip — Determination of plastic strain ratio
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Determination of plastic strain ratio
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Determination of plastic strain ratio
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Hardness testing — Tables of Knoop hardness values for use in tests made on flat surfaces
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Earing test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Earing test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Earing test
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 1: Measurement and application of forming-limit diagrams in the press shop
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Determination of forming-limit curves for sheet and strip — Part 1: Measurement and application of forming-limit diagrams in the press shop
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Determination of forming-limit curves for sheet and strip — Part 2: Determination of forming-limit curves in the laboratory
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Guidelines for the determination of forming-limit diagrams
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Fatigue testing — General principles
|
30.60 | ISO/TC 164/SC 4 |
Metallic materials — Fatigue testing — Axial-strain-controlled method
|
95.99 | ISO/TC 164 |
Metallic materials — Fatigue testing — Axial-strain-controlled method
|
90.92 | ISO/TC 164/SC 4 |
Metallic materials — Fatigue testing — Statistical planning and analysis of data
|
95.99 | ISO/TC 164 |
Metallic materials — Fatigue testing — Statistical planning and analysis of data
|
90.92 | ISO/TC 164/SC 4 |
Metallic materials — Fatigue testing — Fatigue crack growth method
|
95.99 | ISO/TC 164 |
Metallic materials — Fatigue testing — Fatigue crack growth method
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Fatigue testing — Fatigue crack growth method
|
90.92 | ISO/TC 164/SC 4 |
Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and reporting requirements
|
90.93 | ISO/TC 164/SC 4 |
Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduction methods
|
90.93 | ISO/TC 164/SC 4 |
Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
|
90.92 | ISO/TC 164/SC 4 |
Metallic materials — Principles and designs for multiaxial fatigue testing
|
60.60 | ISO/TC 164/SC 4 |
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness — Technical Corrigendum 1
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
|
60.60 | ISO/TC 164/SC 4 |
Mechanical testing of metals — Symbols used with their definitions — Part 1: Symbols and definitions in published standards
|
95.99 | ISO/TC 164 |
Mechanical testing of metals — Symbols used with their definitions — Part 2: Recommendations for the development of symbols and definitions
|
95.99 | ISO/TC 164 |
Metallic materials — Determination of plane-strain fracture toughness
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Determination of plane-strain fracture toughness
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Determination of plane-strain fracture toughness
|
95.99 | ISO/TC 164/SC 4 |
Mechanical testing of metals — Ductility testing — Compression test for porous and cellular metals
|
90.93 | ISO/TC 164/SC 2 |
Sintered metal materials excluding hardmetals — Determination of compressive yield strength
|
95.99 | ISO/TC 119/SC 3 |
Sintered metal materials excluding hardmetals — Determination of compressive yield strength
|
90.93 | ISO/TC 119/SC 3 |
Steel — Charpy V-notch pendulum impact test — Instrumented test method
|
95.99 | ISO/TC 164/SC 4 |
Steel — Charpy V-notch pendulum impact test — Instrumented test method — Amendment 1: Annex D — Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
|
60.60 | ISO/TC 164/SC 4 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
|
90.92 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
|
40.20 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
|
90.92 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
|
40.20 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
|
90.92 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
|
40.20 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
|
60.60 | ISO/TC 164/SC 3 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 6: Instrumented indentation test at elevated temperature
|
40.00 | ISO/TC 164/SC 3 |
Metallic materials — Hardness test — Universal test
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Strain analysis report
|
95.99 | ISO/TC 164/SC 2 |
Mechanical tests on metallic materials — Uncertainty in low-cycle fatigue
|
30.60 | ISO/TC 164/SC 4 |
Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
|
60.60 | ISO/TC 164/SC 1 |
Metallic materials — Tube ring hydraulic pressure test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Tube ring hydraulic pressure test
|
90.93 | ISO/TC 164/SC 2 |
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
|
90.60 | ISO/TC 17/SC 10 |
Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests
|
95.99 | ISO/TC 17/SC 10 |
Metallic materials — Tensile testing at low temperature
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Sheet and strip — Hole expanding test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Method of hole expanding test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Hole expanding test
|
90.92 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Hole expanding test
|
30.60 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Leeb hardness test — Part 1: Test method
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Ductility testing — High speed compression test for porous and cellular metals
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Ductility testing — High speed compression test for porous and cellular metals
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Conversion of hardness values
|
95.99 | ISO/TC 164/SC 3 |
Metallic materials — Conversion of hardness values
|
90.93 | ISO/TC 164/SC 3 |
Metallic materials — Torsion test at ambient temperature
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Torsion test at room temperature
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
|
60.60 | ISO/TC 164/SC 3 |
Metallic materials — Tensile testing in liquid helium
|
95.99 | ISO/TC 164/SC 1 |
Method for evaluation of tensile properties of metallic superplastic materials
|
95.99 | ISO/TC 164/SC 2 |
Method for evaluation of tensile properties of metallic superplastic materials
|
90.93 | ISO/TC 164/SC 2 |
Metallic materials — Steel — Method of test for the determination of brittle crack arrest toughness, Kca
|
90.20 | ISO/TC 164/SC 4 |
Metallic materials — Steel — Method of test for the determination of brittle crack arrest temperature (CAT)
|
30.60 | ISO/TC 164/SC 4 |
Metallic materials — Sheet and strip — Erichsen cupping test
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Erichsen cupping test
|
90.92 | ISO/TC 164/SC 2 |
Temperature verification method applied to dynamic fatigue testing
|
60.60 | ISO/TC 164/SC 4 |
Hardmetals — Knoop hardness test
|
95.99 | ISO/TC 119/SC 4 |
Metallic materials — Fatigue testing — Axial plane bending method
|
60.60 | ISO/TC 164/SC 4 |
Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint
|
90.93 | ISO/TC 164/SC 4 |
Metallic materials – Fatigue testing – Force controlled thermo-mechanical fatigue testing method
|
90.92 | ISO/TC 164/SC 4 |
Metallic materials – Fatigue testing – Force controlled thermo-mechanical fatigue testing method
|
40.00 | ISO/TC 164/SC 4 |
Metallic materials — Mechanical testing — Vocabulary
|
90.92 | ISO/TC 164 |
Metallic materials — Verification of the alignment of fatigue testing machines
|
90.93 | ISO/TC 164/SC 4 |
Metallic materials — High strain rate torsion test at room temperature
|
60.60 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending
|
95.99 | ISO/TC 164/SC 2 |
Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending
|
90.93 | ISO/TC 164/SC 2 |
Mechanical testing of metals — Symbols and definitions in published standards
|
95.99 | ISO/TC 164 |
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
|
95.99 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
|
90.92 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
|
40.20 | ISO/TC 164/SC 1 |
Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
|
90.93 | ISO/TC 164/SC 1 |
Metallic materials — Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
|
90.92 | ISO/TC 164/SC 4 |
Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
|
95.99 | ISO/TC 164/SC 4 |
Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
|
90.93 | ISO/TC 164/SC 4 |
Hardmetals — Palmqvist toughness test
|
90.92 | ISO/TC 119/SC 4 |
Hardmetals — Palmqvist toughness test
|
40.99 | ISO/TC 119/SC 4 |
Hardmetals — Abrasion tests for hardmetals
|
95.99 | ISO/TC 119/SC 4 |
Hardmetals — Abrasion tests for hardmetals
|
60.60 | ISO/TC 119/SC 4 |
Metallic materials — Measurement of mechanical properties by an instrumented indentation test — Indentation tensile properties
|
90.93 | ISO/TC 164/SC 3 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.