Filter :
Standard and/or project under the direct responsibility of ISO/TC 29/SC 9 Secretariat | Stage | ICS |
---|---|---|
Parallel shank jobber and stub series drills and Morse taper shank drills
|
95.99 | |
Parallel shank jobber and stub series drills and Morse taper shank drills — Technical Corrigendum 1
|
95.99 | |
Parallel shank jobber and stub series drills and Morse taper shank drills
|
90.93 | |
Hand reamers
|
90.93 | |
Reamers — Part 2: Long fluted machine reamers with Morse taper shanks
|
90.60 | |
Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares
|
90.60 | |
Reduction sleeves and extension sockets for tools with Morse taper shanks
|
90.93 | |
Drill chuck tapers
|
90.93 | |
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
|
95.99 | |
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
|
90.93 | |
Shanks for turning and planing tools — Types and dimensions of the section
|
95.99 | |
Shanks for turning and planing tools — Shapes and dimensions of the section
|
90.60 | |
Carbide tips for brazing on turning tools
|
95.99 | |
Carbide tips for brazing on turning tools
|
90.93 | |
Turning tools with carbide tips — External tools
|
95.99 | |
Turning tools with carbide tips — External tools
|
90.93 | |
Machine tools — Self-holding tapers for tool shanks
|
90.60 | |
7/24 tapers for tool shanks for manual changing
|
90.60 | |
Parallel shank twist drills — Long series
|
95.99 | |
Cylindrical shank twist drills — Long series
|
95.99 | |
Cylindrical shank twist drills — Long series
|
90.93 | |
Turning tools with carbide tips — Designation and marking
|
90.20 | |
Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application
|
95.99 | |
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application
|
95.99 | |
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1
|
95.99 | |
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
|
95.99 | |
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
|
90.60 | |
Turning tools with carbide tips — Internal tools
|
95.99 | |
Turning tools with carbide tips — Internal tools
|
90.93 | |
Machine chucking reamers with parallel shanks or Morse taper shanks
|
95.99 | |
Machine chucking reamers with cylindrical shanks and Morse taper shanks
|
90.93 | |
Special tolerances for reamers
|
90.60 | |
Short machine taps and hand taps
|
95.99 | |
Short machine taps and hand taps
|
90.93 | |
Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation
|
90.93 | |
Milling machine arbors with 7/24 tapers — Part 2: Accessories
|
90.60 | |
Centre drills for centre holes without protecting chamfers — Type A
|
95.99 | |
Centre drills for centre holes without protecting chamfers — Type A
|
90.93 | |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
|
95.99 | |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
|
90.60 | |
Machine tools — Morse taper shanks — Cotter slots with taper keys
|
90.60 | |
End mills and slot drills — Part 1: Milling cutters with cylindrical shanks
|
95.99 | |
End mills and slot drills — Part 1: Milling cutters with cylindrical shanks
|
90.93 | |
End mills and slot drills — Part 2: Milling cutters with Morse taper shanks
|
95.99 | |
End mills and slot drills — Part 2: Dimensions and designation of milling cutters with Morse taper shanks
|
90.93 | |
End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks
|
95.99 | |
End mills and slot drills — Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
|
90.93 | |
Indexable inserts for cutting tools — Designation
|
95.99 | |
Indexable inserts for cutting tools — Designation
|
95.99 | |
Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts
|
95.99 | |
Indexable inserts for cutting tools — Designation
|
95.99 | |
Indexable inserts for cutting tools — Designation — Technical Corrigendum 1
|
95.99 | |
Indexable inserts for cutting tools — Designation
|
95.99 | |
Indexable inserts for cutting tools — Designation
|
90.93 | |
Machine bridge reamers
|
95.99 | |
Machine bridge reamers
|
95.99 | |
Machine bridge reamers
|
90.60 | |
Finishing reamers for morse and metric tapers, with parallel shanks and morse taper shanks
|
95.99 | |
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
|
95.99 | |
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
|
90.93 | |
Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps
|
90.93 | |
Hand taps for parallel and taper pipe threads — General dimensions and marking
|
95.99 | |
Hand taps for parallel and taper pipe threads — General dimensions and marking
|
90.93 | |
Metal slitting saws with fine and coarse teeth — Metric series
|
95.99 | |
Metal slitting saws with fine and coarse teeth — Metric series
|
95.99 | |
Metal slitting saws with fine and coarse teeth — Metric series
|
90.60 | |
Drills for use prior to tapping screw threads
|
90.93 | |
Hacksaw blades — Part 2: Dimensions for machine blades
|
90.93 | |
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
|
90.93 | |
Centre drills for centre holes with protecting chamfer — Type B
|
95.99 | |
Centre drills for centre holes with protecting chamfer — Type B
|
90.93 | |
Centre drills for centre holes with radius form — Type R
|
95.99 | |
Centre drills for centre holes with radius form — Type R
|
90.93 | |
Hand- and machine-operated circular screwing dies and hand-operated die stocks
|
90.93 | |
Cylindrical cutters with plain bore and key drive — Metric series
|
95.99 | |
Cylindrical cutters with plain bore and key drive — Metric series
|
90.93 | |
Slotting cutters with plain bore and key drive — Metric series
|
90.93 | |
Shell end mills with plain bore and tenon drive — Metric series
|
90.93 | |
Side and face milling cutters with plain bore and key drive — Metric series
|
90.93 | |
Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
|
95.99 | |
Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
|
90.60 | |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
|
90.93 | |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1
|
60.60 | |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Technical Corrigendum 1
|
60.60 | |
Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2
|
60.60 | |
Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm
|
90.60 | |
Circular saw blades for woodworking — Dimensions
|
95.60 | |
Milling cutters mounted on centring arbors having a 7/24 taper — Fitting dimensions — Centring arbors
|
90.93 | |
Milling cutters mounted on centring arbors having a 7/24 taper — Inserted tooth cutters
|
90.93 | |
Single point cutting tools — Corner radii
|
95.99 | |
Single point cutting tools — Corner radii
|
90.93 | |
Extra-long Morse taper shank twist drills
|
95.99 | |
Extra-long Morse taper shank twist drills
|
90.93 | |
Extra-long parallel shank twist drills
|
95.99 | |
Extra-long parallel shank twist drills
|
90.93 | |
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
|
95.99 | |
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
|
90.93 | |
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
|
95.99 | |
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
|
90.93 | |
Narrow bandsaw blades for woodworking — Dimensions
|
95.60 | |
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive
|
90.93 | |
T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
|
90.93 | |
Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks
|
90.93 | |
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
|
90.60 | |
Cylindrical shanks for milling cutters — Part 3: Dimensional characteristics of threaded shanks
|
90.93 | |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
|
95.99 | |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
|
95.99 | |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
|
95.99 | |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
|
90.93 | |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
|
95.99 | |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
|
90.60 | |
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
|
95.99 | |
Subland twist drills for holes prior to tapping screw threads
|
90.60 | |
Subland twist drills with cylindrical shanks for holes prior to tapping screw threads
|
95.99 | |
Hand taper pin reamers
|
90.93 | |
Machine taper pin reamers with parallel shanks
|
95.99 | |
Machine taper pin reamers with parallel shanks
|
90.93 | |
Machine taper pin reamers with Morse taper shanks
|
95.99 | |
Machine taper pin reamers with Morse taper shanks
|
90.93 | |
Tool-life testing with single-point turning tools
|
90.60 | |
Milling cutters — Nomenclature
|
90.60 | |
Milling cutters — Nomenclature — Technical Corrigendum 1
|
60.60 | |
Inverse dovetail cutters and dovetail cutters with cylindrical shanks
|
90.93 | |
Bore cutters with key drive — Form milling cutters with constant profile
|
95.99 | |
Bore cutters with key drive — Form milling cutters with constant profile
|
90.93 | |
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
|
90.93 | |
Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper
|
90.60 | |
Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper
|
90.60 | |
Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface
|
90.60 | |
Tapered die-sinking cutters with parallel shanks
|
90.20 | |
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
|
90.93 | |
Parallel shank tools — Driving tenons and sockets — Dimensions
|
95.99 | |
Countersinks, 90 degrees, with Morse taper shanks and detachable pilots
|
95.99 | |
Countersinks, 90°, with Morse taper shanks and detachable pilots
|
90.93 | |
Countersinks, 90 degrees, with parallel shanks and solid pilots
|
95.99 | |
Countersinks, 90°, with parallel shanks and solid pilots
|
90.93 | |
Counterbores with parallel shanks and solid pilots
|
95.99 | |
Counterbores with parallel shanks and solid pilots
|
90.93 | |
Counterbores with Morse taper shanks and detachable pilots
|
95.99 | |
Counterbores with Morse taper shanks and detachable pilots
|
90.93 | |
Detachable pilots for use with counterbores and 90 degrees countersinks — Dimensions
|
95.99 | |
Hand- and machine-operated circular screwing dies for taper pipe threads — R series
|
95.99 | |
Hand- and machine-operated circular screwing dies for taper pipe threads — R series
|
90.93 | |
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series
|
95.99 | |
Hand- and machine-operated circular screwing dies for parallel pipe threads — G series
|
90.93 | |
Jig bushes — Definitions and nomenclature
|
95.60 | |
Metal cutting band saw blades — Part 1: Definitions and terminology
|
95.99 | |
Metal-cutting band saw blades — Part 1: Vocabulary
|
90.93 | |
Metal cutting band saw blades — Part 2: Basic dimensions and tolerances
|
95.99 | |
Metal-cutting band saw blades — Part 2: Characteristics and dimensions
|
90.93 | |
Hardmetal heading dies — Terminology
|
95.60 | |
As-sintered hardmetal pellets used in heading dies — Dimensions and tolerances
|
95.60 | |
Machine tools — Positive drive of Morse tapers
|
90.93 | |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks
|
90.60 | |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation
|
90.60 | |
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
|
90.93 | |
Twist drills — Terms, definitions and types
|
90.60 | |
Twist drills — Terms, definitions and types — Technical Corrigendum 1
|
60.60 | |
Reamers — Terms, definitions and types
|
90.93 | |
Ground high speed steel tool bits
|
95.60 | |
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
|
95.99 | |
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
|
90.93 | |
Turning and copying tool holders and cartridges for indexable inserts — Designation
|
95.99 | |
Turning and copying tool holders and cartridges for indexable inserts — Designation
|
95.99 | |
Turning and copying tool holders and cartridges for indexable inserts — Designation
|
90.93 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 1: Designation, styles, dimensions and calculation for corrections
|
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 2: Style F
|
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 3: Style K
|
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 4: Style L
|
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 5: Style U
|
90.60 | |
Tool holders for internal turning with cylindrical shank for indexable inserts — Part 6: Style Q
|
90.60 | |
Boring bars for indexable inserts — Dimensions
|
95.99 | |
Boring bars for indexable inserts — Dimensions
|
95.99 | |
Boring bars for indexable inserts — Dimensions — Amendment 1
|
95.99 | |
Boring bars for indexable inserts — Dimensions
|
95.99 | |
Boring bars for indexable inserts — Dimensions
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
|
90.93 | |
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
|
95.99 | |
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
|
90.93 | |
Single point tool holders for turning and copying, for indexable inserts — Dimensions
|
95.99 | |
Single-point tool holders for turning and copying, for indexable inserts — Dimensions
|
95.99 | |
Single-point tool holders for turning and copying, for indexable inserts — Dimensions — Amendment 1
|
95.99 | |
Single-point tool holders for turning and copying, for indexable inserts — Dimensions
|
95.99 | |
Single-point tool holders for turning and copying, for indexable inserts — Dimensions
|
95.99 | |
Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 2: Style F
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 3: Style G
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 4: Style J
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 5: Style K
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 6: Style L
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 7: Style R
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 8: Style S
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 9: Style T
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 10: Style U
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 11: Style W
|
90.60 | |
Cartridges, type A, for indexable inserts — Part 12: Style Y
|
90.60 | |
Cartridges, type A, for indexable inserts — Dimensions — Addendum 1
|
95.99 | |
Cartridges, type A, for indexable inserts — Dimensions
|
95.99 | |
Cartridges, type A, for indexable inserts — Dimensions
|
95.99 | |
Polygonal turret interface with flat contact surface — Part 1: Shanks of type F, H and A
|
60.60 | |
Polygonal turret interface with flat contact surface — Part 2: Receivers of type F, H, A and X for shanks of type F, H and A
|
60.60 | |
Polygonal turret interface with flat contact surface — Part 3: Coupling for driven tool holders with shanks of type F and A
|
60.60 | |
Taps and thread cutting — Nomenclature of the main types and terminology
|
90.93 | |
Circular screwing dies — Terminology
|
90.93 | |
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion
|
90.93 | |
Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion — Technical Corrigendum 1
|
60.60 | |
Double equal angle cutters with plain bore and key drive
|
95.99 | |
Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation
|
95.99 | |
Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation
|
95.99 | |
Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation
|
95.99 | |
End mills with indexable inserts — Part 1: End mills with flatted parallel shank
|
95.99 | |
End mills with indexable inserts — Part 1: End mills with flatted cylindrical shank
|
90.93 | |
End mills with indexable inserts — Part 2: End mills with Morse taper shank
|
95.99 | |
End mills with indexable inserts — Part 2: End mills with Morse taper shank
|
90.93 | |
Face milling cutters with indexable inserts — Dimensions
|
95.99 | |
Face and shoulder milling cutters with indexable inserts — Dimensions
|
90.93 | |
Side and face milling (slotting) cutters with indexable inserts — Dimensions
|
95.99 | |
Side and face milling (slotting) cutters with indexable inserts — Dimensions
|
90.60 | |
Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance
|
95.99 | |
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance
|
95.99 | |
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts
|
95.99 | |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
|
95.99 | |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
|
90.60 | |
Core drills with parallel shanks and with Morse taper shanks
|
95.99 | |
Core drills with parallel shanks and with Morse taper shanks
|
90.93 | |
Hexagonal dienuts
|
90.93 | |
Saw teeth for woodworking saws — Profile shape — Terminology and designation
|
90.60 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions
|
95.99 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
|
90.93 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics
|
95.99 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF
|
90.93 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
|
95.99 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
|
90.60 | |
Bore type milling cutters for indexable inserts — Designation
|
95.99 | |
Hardmetal burrs — Part 1: General specifications
|
95.99 | |
Hardmetal burrs — Part 1: General specifications
|
90.60 | |
Hardmetal burrs — Part 2: Cylindrical burrs (style A)
|
95.99 | |
Hardmetal burrs — Part 2: Cylindrical burrs (style A)
|
90.60 | |
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
|
95.99 | |
Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C)
|
90.60 | |
Hardmetal burrs — Part 4: Spherical burrs (style D)
|
95.99 | |
Hardmetal burrs — Part 4: Spherical burrs (style D)
|
90.60 | |
Hardmetal burrs — Part 5: Oval burrs (style E)
|
95.99 | |
Hardmetal burrs — Part 5: Oval burrs (style E)
|
90.60 | |
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
|
95.99 | |
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F)
|
90.60 | |
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
|
95.99 | |
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G)
|
90.60 | |
Hardmetal burrs — Part 8: Flame burrs (style H)
|
95.99 | |
Hardmetal burrs — Part 8: Flame burrs (style H)
|
90.60 | |
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
|
95.99 | |
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
|
90.60 | |
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
|
95.99 | |
Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L)
|
90.60 | |
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
|
95.99 | |
Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M)
|
90.60 | |
Hardmetal burrs — Part 12: Inverted cone burrs (style N)
|
95.99 | |
Hardmetal burrs — Part 12: Inverted cone burrs (style N)
|
90.60 | |
Shank type milling cutters for indexable inserts — Designation
|
95.99 | |
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess
|
95.99 | |
Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess
|
90.93 | |
Tool life testing in milling — Part 1: Face milling
|
90.93 | |
Tool life testing in milling — Part 2: End milling
|
90.93 | |
High-speed steel machine taps with ground threads — Technical specifications
|
90.60 | |
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
|
90.93 | |
7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF
|
90.93 | |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
|
95.99 | |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
|
90.20 | |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
|
95.99 | |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
|
90.93 | |
Machine tools — Front faces of spindle holders for machining centres — Functional dimensions
|
90.60 | |
Drills with indexable inserts — Cylindrical shanks with a parallel flat
|
95.99 | |
Drills with indexable inserts — Cylindrical shanks with a parallel flat
|
90.60 | |
End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
|
95.99 | |
End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank
|
90.93 | |
End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
|
95.99 | |
End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
|
90.93 | |
Dimensions of accessories for cutter arbors with parallel key and tenon drive
|
90.93 | |
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
|
90.60 | |
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
|
90.60 | |
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
|
90.60 | |
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
|
90.60 | |
Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
|
90.60 | |
Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
|
90.60 | |
Key type three-jaw drill chucks — Specification
|
90.60 | |
Keyless type three-jaw drill chucks — Specification
|
90.60 | |
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
|
90.93 | |
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
|
90.93 | |
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
|
90.93 | |
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
|
90.93 | |
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
|
90.93 | |
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
|
90.93 | |
Tool holders with cylindrical shank — Part 7: Type F with taper seat
|
90.93 | |
Tool holders with cylindrical shank — Part 8: Type Z, accessories
|
90.93 | |
Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
|
90.93 | |
Spot drills
|
95.99 | |
Spot drills
|
90.93 | |
High-speed steel two-flute twist drills — Technical specifications
|
90.60 | |
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
|
90.93 | |
Solid hardmetal end mills with parallel shank — Dimensions
|
95.99 | |
Solid hardmetal end mills with cylindrical shank — Dimensions
|
95.99 | |
Solid hardmetal end mills with cylindrical shank — Dimensions
|
90.60 | |
Cutting tools — Designation of high-speed steel groups
|
95.99 | |
Cutting tools — Designation of high-speed steel groups
|
90.93 | |
Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation
|
95.99 | |
Milling cutters — Designation — Part 1: Shank type end mills of solid or tipped design
|
95.99 | |
Milling cutters — Designation — Part 1: Shank-type end mills of solid or tipped design
|
95.99 | |
Milling cutters — Designation — Part 2: Shank type and bore type milling cutters with indexable inserts
|
95.99 | |
Milling cutters — Designation — Part 2: Shank-type and bore-type milling cutters with indexable inserts
|
95.99 | |
Milling cutters — Designation — Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
|
90.93 | |
Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions
|
95.99 | |
Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB
|
60.60 | |
Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions
|
95.99 | |
Hollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB
|
60.60 | |
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
|
95.99 | |
Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U
|
60.60 | |
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
|
95.99 | |
Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U
|
60.60 | |
Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES
|
60.60 | |
Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES
|
60.60 | |
Woodruff keaseat cutters — Dimensions
|
95.99 | |
Woodruff keyseat cutters — Dimensions
|
90.93 | |
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
|
90.93 | |
Milling cutters for high speed machining — Safety requirements
|
90.60 | |
Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials — Dimensions
|
95.99 | |
Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
|
90.93 | |
Cubic boron nitride inserts, tipped or solid — Dimensions, types
|
95.99 | |
Cubic boron nitride inserts, tipped or solid — Dimensions, types
|
90.20 | |
Polycristalline diamond inserts, tipped — Dimensions, types
|
95.99 | |
Polycristalline diamond inserts, tipped — Dimensions, types
|
90.20 | |
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials — Dimensions
|
90.93 | |
CVD diamond tools — Categorization
|
90.60 | |
Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series
|
60.60 | |
Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series
|
60.60 | |
Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers
|
90.60 | |
Modular taper interface with ball track system — Part 3: Dimensions of shanks, four locking elements
|
40.00 | |
Modular taper interface with ball track system — Part 4: Dimensions of receivers, four locking elements
|
40.00 | |
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
|
95.99 | |
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
|
60.60 | |
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
|
90.93 |
No matching records found. Please try changing the filter settings.